cancer@quad~[50]23:29#dmesg Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 5.0.1_PATCH (GENERIC) #0: Mon Aug 3 21:10:16 CEST 2009 cancer@quad.******.pl:/usr/obj/sys/arch/i386/compile/GENERIC total memory = 2047 MB avail memory = 1999 MB timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 HP ProLiant DL160 G5 ( ) mainbus0 (root) mainbus0: Intel MP Specification (Version 1.4) (INTEL Stoakley ) cpu0 at mainbus0 apid 0: Intel 686-class, 1995MHz, id 0x1067a cpu1 at mainbus0 apid 1: Intel 686-class, 1995MHz, id 0x1067a cpu2 at mainbus0 apid 2: Intel 686-class, 1995MHz, id 0x1067a cpu3 at mainbus0 apid 3: Intel 686-class, 1995MHz, id 0x1067a mpbios: bus 0 is type PCI mpbios: bus 1 is type PCI mpbios: bus 2 is type PCI mpbios: bus 3 is type PCI mpbios: bus 4 is type PCI mpbios: bus 5 is type PCI mpbios: bus 6 is type PCI mpbios: bus 7 is type PCI mpbios: bus 8 is type PCI mpbios: bus 9 is type PCI mpbios: bus 10 is type PCI mpbios: bus 11 is type ISA ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 20, 24 pins ioapic1 at mainbus0 apid 5: pa 0xfec89000, version 20, 24 pins ipmi0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: vendor 0x8086 product 0x4003 (rev. 0x20) ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x4021 (rev. 0x20) ppb0: unsupported PCI Express version pci1 at ppb0 bus 10 pci1: i/o space, memory space enabled, rd/line, wr/inv ok re0 at pci1 dev 0 function 0: RealTek 8168B/8111B PCIe Gigabit Ethernet (rev. 0x01) re0: interrupting at ioapic1 pin 0 re0: Ethernet address 00:1d:0f:bf:3f:2b re0: using 256 tx descriptors rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 2 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ppb1 at pci0 dev 5 function 0: vendor 0x8086 product 0x4025 (rev. 0x20) ppb1: unsupported PCI Express version pci2 at ppb1 bus 9 pci2: no spaces enabled! ppb2 at pci0 dev 9 function 0: vendor 0x8086 product 0x4029 (rev. 0x20) ppb2: unsupported PCI Express version pci3 at ppb2 bus 5 pci3: memory space enabled, rd/line, wr/inv ok ppb3 at pci3 dev 0 function 0: vendor 0x8086 product 0x3500 (rev. 0x01) pci4 at ppb3 bus 6 pci4: no spaces enabled! ppb4 at pci3 dev 0 function 3: vendor 0x8086 product 0x350c (rev. 0x01) ppb4: disabling notification events pci5 at ppb4 bus 8 pci5: no spaces enabled! pchb1 at pci0 dev 16 function 0 pchb1: vendor 0x8086 product 0x4030 (rev. 0x20) pchb2 at pci0 dev 16 function 1 pchb2: vendor 0x8086 product 0x4030 (rev. 0x20) pchb3 at pci0 dev 16 function 2 pchb3: vendor 0x8086 product 0x4030 (rev. 0x20) pchb4 at pci0 dev 16 function 3 pchb4: vendor 0x8086 product 0x4030 (rev. 0x20) pchb5 at pci0 dev 16 function 4 pchb5: vendor 0x8086 product 0x4030 (rev. 0x20) pchb6 at pci0 dev 17 function 0 pchb6: vendor 0x8086 product 0x4031 (rev. 0x20) pchb7 at pci0 dev 21 function 0 pchb7: vendor 0x8086 product 0x4035 (rev. 0x20) pchb8 at pci0 dev 21 function 1 pchb8: vendor 0x8086 product 0x4035 (rev. 0x20) pchb9 at pci0 dev 22 function 0 pchb9: vendor 0x8086 product 0x4036 (rev. 0x20) pchb10 at pci0 dev 22 function 1 pchb10: vendor 0x8086 product 0x4036 (rev. 0x20) ppb5 at pci0 dev 28 function 0: vendor 0x8086 product 0x2690 (rev. 0x09) pci6 at ppb5 bus 2 pci6: i/o space, memory space enabled, rd/line, wr/inv ok vga1 at pci6 dev 0 function 0: vendor 0x102b product 0x0522 (rev. 0x02) wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0 drm at vga1 not configured ppb6 at pci0 dev 28 function 1: vendor 0x8086 product 0x2692 (rev. 0x09) pci7 at ppb6 bus 3 pci7: memory space enabled, rd/line, wr/inv ok bge0 at pci7 dev 0 function 0: Broadcom BCM5722 Gigabit Ethernet bge0: interrupting at ioapic0 pin 17 bge0: ASIC BCM5755 C0 (0xa200), Ethernet address 00:23:7d:29:d9:e4 bge0: setting short Tx thresholds ukphy0 at bge0 phy 1: Generic IEEE 802.3u media interface ukphy0: OUI 0x000af7, model 0x002d, rev. 0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ppb7 at pci0 dev 28 function 2: vendor 0x8086 product 0x2694 (rev. 0x09) pci8 at ppb7 bus 4 pci8: memory space enabled, rd/line, wr/inv ok bge1 at pci8 dev 0 function 0: Broadcom BCM5722 Gigabit Ethernet bge1: interrupting at ioapic0 pin 18 bge1: ASIC BCM5755 C0 (0xa200), Ethernet address 00:23:7d:29:d9:e5 bge1: setting short Tx thresholds ukphy1 at bge1 phy 1: Generic IEEE 802.3u media interface ukphy1: OUI 0x000af7, model 0x002d, rev. 0 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2688 (rev. 0x09) uhci0: interrupting at ioapic0 pin 23 usb0 at uhci0: USB revision 1.0 uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2689 (rev. 0x09) uhci1: interrupting at ioapic0 pin 19 usb1 at uhci1: USB revision 1.0 uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x268a (rev. 0x09) uhci2: interrupting at ioapic0 pin 18 usb2 at uhci2: USB revision 1.0 uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x268b (rev. 0x09) uhci3: interrupting at ioapic0 pin 16 usb3 at uhci3: USB revision 1.0 ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x268c (rev. 0x09) ehci0: interrupting at ioapic0 pin 23 ehci0: BIOS has given up ownership ehci0: EHCI version 1.0 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3 usb4 at ehci0: USB revision 2.0 ppb8 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xd9) pci9 at ppb8 bus 1 pci9: no spaces enabled! ichlpcib0 at pci0 dev 31 function 0 ichlpcib0: vendor 0x8086 product 0x2670 (rev. 0x09) timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000 ichlpcib0: 24-bit timer ichlpcib0: TCO (watchdog) timer configured. piixide0 at pci0 dev 31 function 1 piixide0: Intel 631xESB/632xESB IDE Controller (rev. 0x09) piixide0: bus-master DMA support present piixide0: primary channel configured to compatibility mode piixide0: primary channel interrupting at ioapic0 pin 14 atabus0 at piixide0 channel 0 piixide0: secondary channel configured to compatibility mode piixide0: secondary channel interrupting at ioapic0 pin 15 atabus1 at piixide0 channel 1 ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x2682 ahcisata0: interrupting at ioapic0 pin 19 ahcisata0: AHCI revision 1.1, 6 ports, 32 command slots, features 0xc6106000 atabus2 at ahcisata0 channel 0 atabus3 at ahcisata0 channel 1 atabus4 at ahcisata0 channel 2 atabus5 at ahcisata0 channel 3 atabus6 at ahcisata0 channel 4 atabus7 at ahcisata0 channel 5 isa0 at ichlpcib0 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 attimer0 at isa0 port 0x40-0x43: AT Timer pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker (CPU-intensive output) sysbeep0 at pcppi0 npx0 at isa0 port 0xf0-0xff npx0: reported by CPUID; using exception 16 attimer0: attached to pcppi0 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 0: cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) cd0(piixide0:0:0): using PIO mode 4, DMA mode 2 (using DMA) uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered IPsec: Initialized Security Association Processing. ahcisata0 port 0: device present, speed: 1.5Gb/s ahcisata0 port 1: device present, speed: 1.5Gb/s ahcisata0 port 2: device present, speed: 1.5Gb/s wd0 at atabus2 drive 0: wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA) wd1 at atabus3 drive 0: wd1: drive supports 16-sector PIO transfers, LBA48 addressing wd1: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA) wd2 at atabus4 drive 0: wd2: drive supports 16-sector PIO transfers, LBA48 addressing wd2: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd2(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA) uhidev0 at uhub0 port 1 configuration 1 interface 0 uhidev0: ServerEngines SE USB Device, rev 1.10/0.01, addr 2, iclass 3/1 ukbd0 at uhidev0 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub0 port 1 configuration 1 interface 1 uhidev1: ServerEngines SE USB Device, rev 1.10/0.01, addr 2, iclass 3/1 ums0 at uhidev1: 8 buttons and Z dir. wsmouse1 at ums0 mux 0 ipmi0: version 2.0 interface KCS iobase 0xca2/2 spacing 1 Kernelized RAIDframe activated pad0: outputs: 44100Hz, 16-bit, stereo audio0 at pad0: half duplex boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation) cancer@quad~[51]23:29#